Saturday 19 May 2012

Upcycled Pendant Necklace

  Hi Everyone,

 I love making Jewelry, its a great passion of mine and I'm always on the lookout for something unique and interesting that can be worn on any occasion. I like to re-purpose or up cycle items if possible, which brings me to this easy little project...

I had this watch that I got for my 21st many years ago and had long since stopped working. So I took it apart, not quite sure what I would do with it.

I decided to stamp on the metal face, but if you look closely you will see that some of the markings started to rub off during the stamping process. 
 

I used a Sharpie to enhance the stamped letters and when I wiped the excess ink off, the rest of the watch markings came off too. 

Now I was left with basically a plain pendant - which was actually okay.

While looking for components to add to my pendant, I decided on an old ring that was part of a set that I never wore and and earring which had lost its partner ages ago. And a large flat ring I had in my craft box.

Using E6000 I glued the ring onto the pendant. I also made a small hole into the top of the pendant using a needle and hammer, so that a jump ring could be threaded through.


I cut the back off the earing and glued it into the pendant, over the hole in the middle. Then added the flat ring to the pendant with a jump ring.

 I also came across a stash of really old Sterling silver chains at the back of my cupboard and one was the perfect length.....

 I love how it turned out and it cost me nothing except a bit of my time. 

The possibilities are endless, so have a look in your jewelry box or stash of broken watches and make yourself a fabulous new item...

Take care everyone,

Don't forget to follow me on Facebook :-)


xxx

Photobucket












9 comments:

  1. I'll say it again....I LOVE this piece! You are one crafty, clever girl! Hugs to you...

    ReplyDelete
  2. Natalie, this is beautiful! I've been wanting to try my hand at stamping jewelry! Thanks for following me, i am now following you as well! I'd love to have you stop and link this up tomorrow at our link party - Tip Toe Thur Tuesday!
    Kim
    tiarasandbowties.blogspot.com

    ReplyDelete
    Replies
    1. Oh thank you for the follow Kim - I will link up next week xxx nat

      Delete
  3. Natalie, You are so creative my friend! LOVE how this turned out! :-)

    ReplyDelete
  4. What a STUNNING piece!!!!! Great tutorial!!

    Now, I hope you are planning on sharing this at The DIY Dreamer.. From Dream To Reality!! Please!!

    ReplyDelete

Don't forget to leave me some comment love.....