Hello Everyone
I have an easy ring tutorial for you all today..
It is super easy to make, really! Don't let all the photo's daunt you.
You will need: a few beads of your choice , 18-20 gauge jewelry wire, 2 crimps, long nose pliers, and something to use as a measure for your finger size (ideally you would use a ring mandrel, but the lid of my nail polish bottle worked perfectly)
I have taken a picture of every step so if you follow those without even
reading my instructions - you will be fine... Lets start..
Using the wire, measure your finger, gently place around the mandrel/bottle lid and wind around a few times. Remember to keep the wire tightly packed together and it should stay in shape while you are handling it
Cut the wire from the roll and work with the coils you have made. Thread a crimp on first then your beads, then another crimp.
I found it easier to keep placing my ring onto the lid to keep the coils together and to keep reshaping as I worked. When you are happy with the location of the beads, then its time to neaten the ends by folding them at the bottom, as pictured. Use the pliers to keep the wire neat and tight. Make sure you have no sharp ends sticking out.
Once the ends have been neatened off, then tighten the crimps on either side of the beads.
To add strength to the ring and to help keep its shape - I added extra wire to the sides (optional) just by winding a piece around andending off as I did before. Give the outer coils a little pull so they frame the beads and voila!!
Now its time to show off your new ring, wear it and take photo's of it...
Easy right? Sooooo easy!!!
Ithought it would be fun to match the ring with my Beach Inspired Bracelet. Worked perfectly don't you think?
Take care
xxx
Linking Up To
